Updated November 2026

A jackery home power station can keep your refrigerator, medical devices, and a few essentials running when the grid goes down, but only if the capacity matches what you actually plug in. This guide walks you through estimating your daily watt-hour needs, adding a safety margin, and checking whether the unit can handle your appliances’ startup surges.

Step 1: List the Loads You Need During an Outage

Start with the appliances you truly need. Most households fall into three groups: refrigeration, medical equipment, and water or safety devices. Skip anything you can live without, such as electric dryers or central air, because those draw far more power than a portable unit is designed to supply.

Shopping for one? See our guide: 6 Best Jackery Explorer 300 Portable Power Station Models for Home Backup (2026).

Step 2: Calculate Watt-Hours for Each Device

Watt-hours (Wh) equal the device’s wattage multiplied by the hours it runs per day. Check the label or manufacturer specs for wattage. If only amps and volts are listed, multiply them together to get watts.

  • Refrigerator: Many modern fridges use about 100 to 200 watts while running, but they cycle on and off. Owners often report a real average of roughly 1 to 2 kWh per day, so plan for about 1,000 to 1,500 Wh daily.
  • CPAP machine: Typically 30 to 60 watts. Running 8 hours a night uses roughly 240 to 480 Wh.
  • Sump pump: Usually 800 to 1,000 watts while pumping, but only a few minutes per cycle. Budget around 200 to 400 Wh per day for a typical household.
  • Phone and LED lights: A few tens of watt-hours total.

Step 3: Add a Safety Margin and Account for Losses

Add your device totals, then add about 20 to 30 percent. Power stations lose some energy converting stored DC power to household AC, and batteries deliver slightly less than their rated capacity over time. A 3,000 Wh daily need, for example, points toward a unit with at least 3,500 to 4,000 Wh of usable capacity.

Step 4: Check Surge Ratings and Outlet Count

Refrigerators, pumps, and some motors demand a brief surge when they start. Confirm that the jackery home power station’s continuous and surge wattage ratings exceed the starting draw of your largest device. Also count the outlets and USB ports so every critical item has a place to plug in.

Device Typical Running Watts Daily Watt-Hours (Estimate)
Refrigerator 100 to 200 1,000 to 1,500
CPAP machine 30 to 60 240 to 480 (8 hours)
Sump pump 800 to 1,000 while running 200 to 400
Phone and LED lights 5 to 20 30 to 80

Common Mistakes to Avoid

  • Using the appliance’s peak wattage instead of its average daily runtime.
  • Forgetting that a fridge running 24 hours does not draw its label wattage constantly.
  • Ignoring surge ratings, which can trip the unit when a pump or compressor starts.
  • Assuming the battery’s full rated capacity is available at all times.
  • Planning for a multi-day outage without a recharging plan such as solar input or a vehicle charger.

A plug-in power meter helps you measure real consumption for each appliance instead of relying on label estimates.
View on Amazon

A solar panel kit extends runtime on sunny days, which matters during longer outages.
View on Amazon

FAQ

Can a jackery home power station run a refrigerator overnight?

Often yes, if the unit has enough usable watt-hours. A typical refrigerator needs roughly 1,000 to 1,500 Wh per day, so check your fridge’s actual consumption with a power meter before relying on it.

How do I know if my CPAP will run through the night?

Multiply your machine’s wattage by your hours of use, then add a margin of 20 to 30 percent. Many CPAP users find a mid-sized unit covers several nights, but confirm with your equipment provider or sleep physician if you depend on therapy.

Should I size a power station for a sump pump?

Yes, because sump pumps draw high surge power and run during storms when outages are most likely. Consult a licensed electrician or plumber to confirm your pump’s requirements before finalizing your setup.

Conclusion

Total the watt-hours for your refrigerator, medical devices, and pump, then add a safety margin of about 25 percent. Confirm the surge rating covers your largest motor, and you will have a clear target for choosing a jackery home power station. Review your numbers each season, since changes in appliances or household needs can shift what your backup must supply.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our solar generators for home backup & emergencies guides, checking product details against manufacturer specifications and owner feedback.