Updated November 2026
An anker solix solar generator works well for home backup when its battery capacity (measured in watt-hours) and its inverter output (measured in watts) both match the devices you plan to run during an outage. Start by adding up the watt-hours your essential loads use per day, then choose a model with a little headroom beyond that number.
Why Capacity and Output Both Matter
Two specs drive almost every buying decision. Watt-hours (Wh) tell you how much energy the battery stores, which sets how long a device can run. Watts (W) tell you how much power the inverter can deliver at one time, which decides whether a device will start and operate at all.
Shopping for one? See our guide: 6 Best Solar Powered Generators for Home Backup Compared (2026).
A refrigerator, for example, may draw a few hundred watts while its compressor runs but far more for a brief moment when it starts. A unit with enough watt-hours but too little output will shut down the moment that surge hits. This is why a generator can have plenty of stored energy and still fail to power a particular appliance.
Sizing a Setup for Essential Loads
Use this rough method to estimate what you need:
- List each device and its rated wattage, usually printed on a label or in the manual.
- Multiply wattage by the hours per day it will actually run. A CPAP machine might run 8 hours at about 40 to 60 W, while a sump pump runs in short cycles.
- Add the results to get your daily watt-hour total.
- Add 20 to 30 percent to cover inverter and conversion losses and battery aging.
Manufacturers typically publish their usable capacity and maximum continuous output, so compare those figures directly against your totals. If you rely on medical equipment, confirm the runtime with your equipment provider or doctor before counting on it.
Tips for Getting the Most From Your Unit
- Prioritize essentials. Power the fridge, lights, router and any medical device first, and leave space-heaters and electric dryers off the list.
- Check the surge rating for any motor-driven appliance before you buy, not after.
- Plan for charging. Solar recharge depends on panel wattage, sunlight and weather. Our guide on Why Is My Solar Generator Charging Slowly? Causes and Fixes explains common slowdowns.
- Test the setup before an outage. Run each device for an hour or so to confirm it works and to see how fast the battery drains.
- Keep the battery in a cool, dry place and avoid storing it fully empty for long periods.
For a step-by-step outage routine, see Using a Solar Generator During a Power Outage: A Practical Plan. If you use a CPAP, Using a Solar Generator or Power Station for a CPAP Machine covers runtime planning in more detail.
What We’d Use
Anker’s SOLIX line is a natural place to start, since the brand publishes clear capacity and output figures for each model.
- Anker SOLIX C1000 Portable Power Station: a compact option for lighter loads such as lights, phones, a router and a small fridge. View on Amazon
- Anker SOLIX F3800 Portable Power Station: a larger unit suited to whole-home essentials and longer outages. View on Amazon
FAQ
How do I know if an anker solix solar generator is big enough?
Add up the watt-hours your essential devices use in a day, add 20 to 30 percent, and compare that total to the unit’s stated capacity. Also confirm the inverter’s continuous output covers your highest-wattage device.
Can it run a refrigerator during an outage?
Many units can, but a fridge cycles on and off and has a startup surge. Check the fridge’s running and surge wattage against the inverter spec, and estimate runtime from its daily energy use.
Is it safe to use with a CPAP or other medical device?
It can be, but runtime and reliability matter a great deal. Consult your doctor or equipment supplier to confirm what backup power you need before relying on any portable unit.

