Updated November 2026
A solar powered generator with battery backup can run essential home loads during an outage, but only if the battery is large enough for what you plan to power and the solar input can recharge it. For a refrigerator, a CPAP machine and a sump pump, most homes need a battery in the 1,000 to 3,000 watt-hour range, plus enough panel wattage to replace that energy within a day of sunlight.
Why the battery matters more than the panels
The battery sets how long you can run anything. The solar panels only decide how fast the battery refills. A unit with a large panel array and a small battery will recharge quickly but run out after a few hours of overnight use. Manufacturers usually specify capacity in watt-hours (Wh), which is the number you need for sizing.
Solar output also drops with clouds, shade, season and panel angle. Owners often report that real-world daily recharge is well below the rated panel wattage, so plan for roughly four to six usable sun hours per day in most of the US.
Sizing for a fridge, CPAP and sump pump
Start with the appliance wattage on each label, then estimate daily use. Use this rough method:
- Find the running watts for each device. A typical CPAP draws about 30 to 60 watts. A standard refrigerator often runs around 100 to 200 watts while the compressor cycles, with a higher startup surge.
- Estimate hours per day. A fridge may cycle roughly 8 to 12 hours a day, a CPAP runs about 8 hours overnight, and a sump pump runs only when water rises.
- Multiply watts by hours to get watt-hours per day for each device, then add them together.
- Add a 20 to 30 percent margin for inverter losses and battery aging.
For example, a 150-watt fridge running 10 hours uses about 1,500 Wh, and a 45-watt CPAP running 8 hours uses about 360 Wh. Adding a sump pump and margin often pushes the total past 2,000 Wh. That is why many households look at mid-size units or add expansion batteries.
What to do before an outage
- Check the unit’s surge rating, since refrigerator and pump motors need more power to start than to run.
- Confirm the inverter output is pure sine wave, which CPAP machines and many electronics require.
- Test the system by running your actual loads for a few hours before a storm.
- Keep the battery charged and stored in a cool, dry place, and recharge it periodically if you will not use it for months.
- Prioritize loads. Run the CPAP first, then the fridge only as needed, and keep the sump pump on a separate plan if flooding is a risk.
What we’d use
For a mid-size whole-essentials setup, look at the EcoFlow DELTA Pro, which owners often pair with additional batteries for longer fridge runtime.
For a smaller budget option that still covers a CPAP and phone charging, the Jackery Explorer 1000 is a common choice among owners who mostly need overnight power. You may also like 5 Best Solar Battery Generators for Home Backup in 2026.
For more on matching a system to your loads, see 6 Best Solar Powered Generators for Home Backup Compared (2026) and Home Backup With a Solar Generator: What It Can Power and How to Connect Safely. If your battery seems to drain faster than expected, Solar Generator Battery Not Holding Charge? Causes and Checks covers the common causes.
FAQ
Can a solar generator run a refrigerator all night?
Often yes, if the battery holds enough watt-hours for the fridge’s daily cycling plus a margin. Check the fridge’s label and plan for roughly 1,000 to 1,500 Wh per day for a standard unit.
Will a CPAP work during a power outage on battery?
Most CPAP machines run well on a pure sine wave inverter. Confirm the model’s power draw and check with your sleep provider or equipment supplier before relying on it.
Is a solar generator enough to run a sump pump?
It can, but sump pumps draw a large startup surge and may run for long periods during heavy rain. Size the battery with that surge in mind, and consult a qualified electrician or plumber for a backup pump setup if flooding is a regular concern.

