Updated November 2026
The ecoflow river 2 specifications come down to a few numbers that matter most during an outage: battery capacity in watt-hours, continuous AC output in watts, charging speed and the number and type of ports. Once you know those figures, you can estimate how long the unit will run your essential loads. This guide walks through each spec and shows you how to turn it into a realistic runtime estimate.
Read the Core Battery and Output Specs
Start with the battery capacity. The River 2 is rated at roughly 256Wh, which is the total energy the battery can deliver under ideal conditions. Next, look at the AC inverter rating. The standard River 2 is specified for a continuous AC output of about 300W, with a surge rating higher than that for short-term startup loads. Watts measure how much power can flow at once, while watt-hours measure how long that power can last. Both matter, and confusing them is the most common sizing mistake.
Shopping for one? See our guide: 6 Best EcoFlow River 3 Max Plus Alternatives for Home Backup (2026).
Check the Ports and Charging Speeds
Manufacturers list the River 2 with a mix of AC outlets, USB-A, USB-C and a 12V car output. Confirm the number of each on the product page before you buy, since port counts vary between River 2 variants. Charging is specified in two ways: from a wall outlet and from solar input. Wall charging is generally the faster route, while solar charging depends on panel wattage, sunlight and the controller’s input limit. Owners often report that solar recharge takes noticeably longer than the wall-charge time, so plan accordingly.
Estimate Runtime for Your Loads
Runtime is roughly: battery watt-hours multiplied by about 0.85 (to account for inverter losses), divided by the load’s wattage. Use the 0.85 factor as a planning estimate, not a guarantee. Here is how that works for common home backup loads, using typical nameplate wattages (check your own device labels):
- Refrigerator (about 100W running average): roughly 2 hours, though compressors cycle, so real-world runtime is often longer.
- CPAP machine (about 40W): roughly 5 hours for a single night’s use, depending on humidifier settings.
- Sump pump (about 800W when running, intermittent): the pump draws high power but runs in short bursts, so it is best sized by its surge rating and duty cycle.
These are rough numbers. Always confirm your appliance’s actual draw with a plug-in watt meter before relying on them.
Match the Specs to Your Backup Plan
Add up only the loads you truly need during an outage. Then compare that total against the River 2’s continuous output rating. If a single appliance’s startup surge exceeds the surge rating, it will not start, regardless of how much battery capacity remains. For a broader look at sizing, see Ecoflow River 2 Power Station: What It Runs and How Long It Lasts, and for the pro variant’s runtime figures, see Ecoflow River 2 Pro Guide: Runtime, Charging and Backup Sizing.
Recommended gear
- Plug-in watt meter: measures the real draw of each appliance so your runtime math uses actual numbers rather than nameplate guesses. View on Amazon
- Solar panel for charging: extends runtime during multi-day outages when grid power stays off, provided the panel’s input matches the unit’s solar limits. View on Amazon
Common mistakes
- Mixing up watts and watt-hours when comparing products.
- Ignoring surge ratings for motor-driven loads like pumps and compressors.
- Assuming the battery delivers its full rated capacity; inverter and conversion losses are real.
- Planning on solar recharge speed that matches wall-charge speed.
- Forgetting that a refrigerator runs intermittently, so measure average draw, not peak.
FAQ
What is the battery capacity of the EcoFlow River 2?
The standard River 2 is rated at about 256Wh. That figure is the total stored energy, and usable output will be somewhat lower due to conversion losses.
How much continuous power can the River 2 supply?
The standard model is specified for about 300W of continuous AC output, with a higher surge rating for short startup bursts. Check the product label for the exact surge figure.
Can the River 2 run a CPAP overnight?
Often yes, since a typical CPAP draws around 40W, but runtime depends on humidifier use and settings. Test with your own machine and consult your sleep provider or physician if you have questions about therapy continuity during outages.
Conclusion
The ecoflow river 2 specifications that count most are battery watt-hours, continuous and surge AC output, and charging speed. Combine those numbers with measured appliance draw to get a realistic runtime estimate. Build in a safety margin, and test your setup before an outage arrives.
Related reading
- Ecoflow River 3 Plus Ups: How to Size It for Home Backup Loads
- Ecoflow River 3 Plus Smart Extra Battery: 3 Best Options Compared (2026)
- Ecoflow River 2 Pro Portable Power Station: What It Runs and How Long (2026)
- Ecoflow River 2 Pro Manual: Where to Find It and How to Use It Safely (2026)
- EcoFlow River 3 UPS: How It Works and How to Set It Up for Outages

