Updated November 2026
Turning off a Jackery Explorer 300 takes a single button press, but doing it the right way protects the battery and keeps connected devices from losing power unexpectedly. This guide walks through how to turn off your how to turn off jackery explorer 300 unit fully, how to shut down only the outputs, and what to check before you store it.
Turn Off the Power Station Completely
To switch the unit off entirely, press and hold the main power button for about two seconds until the display goes dark. A short tap usually just wakes the screen or cycles the display, so a deliberate hold is what you need. Confirm the screen is blank and the fan has stopped before you assume the unit is off.
Shopping for one? See our guide: Jackery Explorer 5000 Plus Review: Is It Worth It?.
Shut Down Individual Outputs First
If you only want to stop power to a device, turn off that output instead of shutting down the whole station. This keeps the unit ready for use and avoids a full restart later. Turn off the AC outlet, USB ports, or DC port using their own buttons, and check that the connected load is no longer drawing power.
- Unplug or switch off the connected appliance or device.
- Press the button for the specific output (AC, USB-A, USB-C, or DC).
- Confirm the indicator for that port has gone off on the display.
- Repeat for each active output.
- Press and hold the main power button to power down the entire unit if you are finished.
Power Down Safely Before Storage or Transport
Before you put the Explorer 300 away, make sure nothing is plugged into it and that the unit is fully off. Store it somewhere cool and dry, away from direct sunlight, and check the battery level periodically. Manufacturers generally advise against storing lithium-based batteries at 0% or 100% for long periods, so topping up or partially discharging before a long break is a reasonable habit.
Checklist before storing
- All connected devices unplugged
- All outputs switched off
- Main power off and display dark
- Battery level checked and stored in a dry, temperate space
- Cables coiled and kept clear of the unit’s ports
Common Mistakes
- Tapping instead of holding. A quick press often only wakes the screen. Hold the power button until the display turns off.
- Pulling the plug on a running load. Yanking a device out of the AC outlet without switching it off first can cause a sudden draw spike. Turn off the device before unplugging.
- Assuming the fan means it is on. The fan can keep running briefly after shutdown while the unit cools. Wait for the display to go fully dark.
- Storing at full or empty charge. Long-term storage at extreme charge levels can reduce battery life.
- Leaving outputs enabled. If an output stays on, it can draw small amounts of power over time and drain the battery unnoticed.
Recommended Gear
A few accessories make shutdown and storage simpler, especially if you move the unit often.
- A protective carrying case helps keep the unit and its ports clean and stable during transport. View on Amazon
- A power strip with individual switches lets you cut power to several devices at once before shutting down the station. View on Amazon
For more on what the Explorer 300 can run before you need to power it down, see Jackery Explorer 300d Portable Power Station: What It Runs and How Long. If you are comparing models in this line, 6 Best Jackery Explorer 300 Portable Power Station Models for Home Backup (2026) covers the options side by side.
FAQ
Does the Jackery Explorer 300 turn off automatically?
Many portable power stations enter a low-power or sleep state after a period of inactivity, and the display may dim or go off. That is not the same as a full shutdown, so press and hold the power button if you want the unit completely off.
Will turning off the outputs drain the battery?
Switching off the outputs stops power going to your devices and reduces drain. A fully powered-off unit draws essentially nothing, so shutting it down is the best choice for long idle periods.
Can I store the unit while it is still charged?
Yes, but avoid keeping it at full or empty for extended periods. Check the manufacturer’s guidance in the manual, and consult the manual or the manufacturer if you have questions about your specific battery condition.
Conclusion
To turn off a Jackery Explorer 300, hold the main power button until the display goes dark, or switch off individual outputs first if you only need to stop a device. Before storage, unplug everything, confirm the unit is fully off, and keep the battery at a moderate charge in a cool, dry place.

