Updated November 2026
A solar generator how much question usually comes down to one thing: how many watt-hours does your home backup actually need? You can answer it by listing the devices you must keep running, estimating their daily energy use, and adding a margin for cloudy days and surprises. This guide walks through that process so you can size a unit for a fridge, a CPAP machine and a sump pump without guessing.
Step 1: List the Loads You Must Keep Running
Start with the essentials, not the whole house. A portable unit rarely runs central air or an electric range, so focus on the items that matter most during a multi-day outage. Most households land on a short list like this:
- Refrigerator or freezer
- CPAP or other medical device
- Sump pump or well pump
- Router, modem and a phone charger
- A few LED lights
If anyone in the home depends on powered medical equipment, confirm your exact requirements with the equipment maker or your doctor before you rely on any backup plan.
Step 2: Calculate Watt-Hours for Each Device
Watt-hours (Wh) tell you how much energy a device uses over time. Use the formula watts × hours per day = watt-hours per day. Check the label or manual for wattage, and remember that refrigerators and pumps cycle on and off, so their real average draw is lower than their peak rating.
| Device | Typical draw (watts) | Estimated hours per day | Approx. Wh per day |
|---|---|---|---|
| Refrigerator (compact) | 50–100 running | 8–10 (cycling) | 400–900 |
| CPAP machine | 30–60 | 8 | 240–480 |
| Sump pump (1/3 HP) | 500–800 running | 0.5–1 | 250–800 |
| Wi-Fi router and modem | 15–25 | 24 | 360–600 |
| LED lights (5 bulbs) | 25–50 total | 5 | 125–250 |
These ranges are rough. Your own device labels and a plug-in energy meter will give you more accurate numbers.
Step 3: Add the Totals and Build in a Margin
Add the daily watt-hours for every load. Then apply two adjustments. First, account for conversion losses: inverters and battery systems typically lose some energy in the process, so plan for roughly 15 to 20 percent more capacity than the raw total. Second, plan for reduced sunlight. If you want to run for two days without any recharge, multiply the daily total by two.
Example: a fridge at 600 Wh, a CPAP at 400 Wh, a sump pump at 500 Wh and electronics and lights at 400 Wh gives 1,900 Wh per day. Adding 20 percent for losses brings you to about 2,280 Wh. For two days, you would look for a unit around 4,500 Wh or more.
Step 4: Match Solar Input to Your Recharge Needs
Capacity tells you how long you can run. Solar input tells you how fast you can refill. Manufacturers usually list maximum input wattage for their solar panels and the expected recharge time under ideal conditions. Real-world sun is often weaker, so a useful rule is to assume your panels will deliver well below their rated output on an average day. If you need to replenish a large battery each day, you will need more panel wattage than you think. For a deeper look at how these systems fit together, see What Is a Portable Solar Generator System and How Does It Work?.
For budget context and what different sizes typically involve, read Solar Generator Cost Compared: How Much Does a Solar Generator Cost in 2026?. If you need a larger whole-home solution, How Much Does a Solar Power Generator Cost? Portable vs Whole-Home Options covers that tradeoff.
Common Mistakes to Avoid
- Sizing for the peak wattage of a sump pump or fridge instead of its average daily energy use.
- Forgetting that inverters and batteries lose energy during conversion.
- Assuming full panel output on cloudy or winter days.
- Ignoring startup surges from motor-driven devices, which can exceed the unit’s continuous rating.
- Skipping a test run; plug in your real loads for a few hours before a storm.
Recommended Gear
A plug-in energy meter helps you measure real consumption for each appliance instead of relying on label estimates. View on Amazon
A heavy-duty extension cord rated for outdoor and appliance use keeps your sump pump or fridge connected safely when the unit sits outside the house. View on Amazon
FAQ
How many watt-hours do I need to run a refrigerator for a day?
A compact refrigerator often uses roughly 400 to 900 watt-hours per day because it cycles on and off. Check the yellow EnergyGuide label for the rated annual kilowatt-hours and divide by 365 for a better estimate.
Can a solar generator run a CPAP machine overnight?
Most CPAP machines draw around 30 to 60 watts, so an eight-hour night typically needs a few hundred watt-hours. Confirm the device’s requirements with your provider before relying on backup power.
Does a sump pump need a bigger generator than a fridge?
A sump pump draws more power while running, so it can require a unit with a higher continuous output rating. Its total daily energy use is often lower than a fridge’s because it runs only in short bursts.
Conclusion
To answer how much solar generator capacity you need, list your essential loads, calculate their daily watt-hours, and add a margin for losses and cloudy weather. Sizing the unit from real numbers rather than peak wattage keeps the fridge, CPAP and sump pump running through an outage. Verify medical and safety requirements with a professional before you depend on any backup system.

