Updated November 2026
The EF EcoFlow portable power station Delta F7168 is a battery-based backup unit designed to keep essential loads running during a power outage. This guide shows you how to estimate how long the unit will last with your specific appliances, how to match its output to your devices, and how to avoid the mistakes that shorten runtime. Before you start, you need one number: the total watt-hours (Wh) of the battery, which you will compare against the power draw of each device you plan to run.
Step 1: List the Devices You Need to Power
Start with the loads that matter most during an outage, such as a refrigerator, a CPAP machine, a sump pump, Wi-Fi equipment, and a few lights. Ignore anything that can wait until grid power returns. Each device needs two values: its rated wattage and its daily energy use in watt-hours.
Shopping for one? See our guide: EF EcoFlow Portable Power Station 3600Wh Delta Pro: 4 Best Options (2026).
- Check the label on each device for wattage (W) or amps and volts, then multiply amps by volts to get watts.
- For cycling appliances like refrigerators, the listed running wattage is often lower than the startup surge, so note both.
- Estimate hours of use per day. A CPAP might run 8 hours; a sump pump might run only a few minutes per cycle.
Step 2: Calculate Daily Watt-Hours and Runtime
Multiply each device’s watts by its hours of use to get watt-hours per day, then add the totals. Divide the battery capacity by that total to estimate runtime. Power stations never deliver their full rated capacity in practice, because inverters and conversion lose energy, so plan for roughly 80 to 90 percent of the listed figure as usable.
| Device | Typical Running Watts | Hours per Day | Daily Wh |
|---|---|---|---|
| Refrigerator (efficient model) | 100 to 150 W average | 8 to 10 | 800 to 1,500 |
| CPAP machine | 30 to 60 W | 8 | 240 to 480 |
| Sump pump (1/3 HP) | 800 W while running | 0.5 to 1 | 400 to 800 |
| LED lights (4 fixtures) | 40 W total | 5 | 200 |
These ranges are illustrative. Your own appliance labels and usage habits should replace them. If your totals approach the unit’s usable capacity, consider the sizing guidance in Ecoflow Delta 3 Premium 1500 Portable Power Station: Sizing for Home Backup.
Step 3: Confirm Output Ratings and Surge Capacity
Capacity tells you how long the battery lasts, but output rating determines what you can plug in at once. Add up the running wattage of everything that might operate simultaneously, then add the surge for motor-driven devices like pumps and compressors. If the sum exceeds the continuous output rating, something will shut off. Staggering loads is a practical workaround.
Consult the manufacturer’s manual for the exact continuous and surge output figures for the Delta F7168, and confirm them before relying on the unit for a medical device. Medical equipment decisions should involve your equipment supplier or physician.
Step 4: Plan Recharging Between Outages
A backup unit only helps if it is charged when the outage starts. Keep it on a wall outlet during normal conditions, and if you plan to extend runtime, pair it with solar input. Solar sizing depends on your panel wattage and local sun hours, so the Solar Panel Size Calculator for Portable Power Stations can help you estimate recharge time.
Common Mistakes
- Using the battery’s nominal capacity as usable capacity without accounting for conversion losses.
- Forgetting refrigerator defrost cycles and startup surges when estimating runtime.
- Plugging a space heater or electric dryer into the unit, which draws far more power than typical backup loads.
- Storing the unit in extreme heat or cold, which reduces battery performance.
- Skipping periodic charge checks, so the battery is low when you need it.
Recommended Gear
- Watt meter plug: Measures actual draw from each appliance, which is more accurate than label estimates. View on Amazon
- Heavy-duty extension cord: Helps route power safely from the unit to devices placed away from the outlet. View on Amazon
FAQ
Can the Delta F7168 run a refrigerator all night?
It can, provided the refrigerator’s average daily watt-hours fit within the unit’s usable capacity. Check the appliance’s energy label and compare it with your battery’s rated Wh after conversion losses.
How do I know if the unit can handle a sump pump?
Confirm that the continuous output rating covers the pump’s running watts and that the surge capacity covers its startup draw. Pumps are motor loads, so surge matters more than for resistive devices.
Should I keep the unit plugged in all the time?
Keeping it plugged in helps ensure it is charged when an outage starts. Check the manufacturer’s guidance on long-term charging and battery maintenance for your specific model.
Conclusion
To use the EF EcoFlow portable power station Delta F7168 effectively, list your essential devices, calculate their daily watt-hours, and compare that total with the unit’s usable capacity and output rating. Build in a margin for conversion losses and surges, and keep the battery charged between outages. Verify specifications with the manufacturer before relying on it for medical or critical loads.

