Updated November 2026
The ecoflow delta ef3 pro is a portable power station that can keep essential household loads running during a power outage. This guide shows you how to estimate your daily energy use in watt-hours, match that number against the unit’s capacity, and decide whether the runtime you get is enough for your critical devices. You will finish with a rough sizing figure you can check against your own appliances.
Step 1: List the Loads You Actually Need
Start with only the devices you cannot go without. A refrigerator, a CPAP machine, a sump pump, a router and a few lights are typical choices. Skip space heaters, electric dryers and central air conditioning, since those draw far more power than a portable unit can supply for long.
Shopping for one? See our guide: 7 Best EcoFlow Delta Pro Ultra Battery Options Compared (2026).
Check each appliance’s nameplate or manual for its wattage. Many devices also list amps and volts; multiply amps by volts to get watts. If a device lists only an annual energy figure in kilowatt-hours, divide by 365 to get a rough daily number.
Step 2: Convert Each Load to Daily Watt-Hours
Watt-hours (Wh) measure energy over time. Multiply each device’s running watts by the hours it will run per day. A refrigerator does not run constantly, so estimate its duty cycle. Compressor appliances often run around a third to half of the time, though this varies with room temperature and how often the door opens.
| Device | Running watts (typical) | Estimated hours per day | Daily Wh (estimate) |
|---|---|---|---|
| Refrigerator | 100–150 W | 8–10 | 800–1,500 Wh |
| CPAP machine | 30–60 W | 8 | 240–480 Wh |
| Sump pump (1/3 HP) | 600–800 W | 0.5–1 | 300–800 Wh |
| Wi-Fi router and modem | 15–25 W | 24 | 360–600 Wh |
| LED lights (6 fixtures) | 40–60 W | 4 | 160–240 Wh |
These ranges are illustrative. Your own nameplate values and usage habits will differ, so use your appliance labels wherever you can.
Step 3: Apply Efficiency Losses and Compare to Capacity
Power stations lose some energy when converting stored DC power to AC for household outlets. Plan on usable output being noticeably lower than the rated watt-hours. A common planning approach is to divide your total daily Wh by about 0.85 to account for conversion losses, then compare the result to the capacity you have available.
Manufacturers list the unit’s rated capacity in watt-hours. Actual delivered energy will be lower, and battery performance also drops in very hot or very cold conditions. For critical medical devices, build in extra margin rather than planning to the edge.
Step 4: Choose a Runtime Target and Plan Recharging
Decide how many hours or days you want to cover. A short outage of a few hours may need only the sump pump and lights, while a multi-day event requires the refrigerator and medical equipment to run continuously. Divide usable capacity by your daily Wh to estimate runtime in days.
Recharging matters as much as capacity. Wall charging is the simplest option during grid power, but once the outage starts you will need an alternative such as solar panels or a vehicle charger. Check the manufacturer’s stated input limits for each source.
Common Mistakes
- Sizing for the refrigerator alone and forgetting the sump pump’s startup surge.
- Using rated battery watt-hours as the usable figure without applying conversion losses.
- Ignoring how often a refrigerator door is opened during an outage.
- Planning only for average wattage and not checking peak load limits on the output ports.
- Leaving medical devices without a backup plan. Consult your medical equipment supplier or physician before relying on any portable power for life-support or CPAP therapy.
Recommended Gear
- A plug-in watt meter helps you measure real consumption of each appliance rather than relying on label estimates. View on Amazon
- A heavy-gauge extension cord rated for your loads keeps connections safe when powering several devices from one station. View on Amazon
For deeper sizing context, see Ecoflow Delta Pro 3600w Explained: Sizing a Home Backup Setup for Outages (2026) and Ecoflow Delta Pro 3 with Extra Battery: How to Size Your Backup (2026). If you plan to recharge with panels, Solar Panels for EcoFlow Delta Pro: How to Choose and Connect Them (2026) covers matching input limits.
FAQ
How many watt-hours do I need to run a refrigerator overnight?
A typical refrigerator often uses roughly 800 to 1,500 Wh per day, depending on size, age and ambient temperature. Check your appliance label or a plug-in meter for a more accurate figure.
Can a portable power station run a sump pump?
Many can, but sump pumps draw a high startup surge. Confirm the unit’s surge rating exceeds your pump’s starting watts, and test the setup before a storm.
Is portable backup power safe for CPAP use?
It can support CPAP therapy when sized with margin, but you should confirm the plan with your sleep physician or equipment provider before relying on it.
Conclusion
Sizing a backup system comes down to listing essential loads, converting them into daily watt-hours, and applying conversion losses. Compare the result to usable capacity to estimate runtime. Build in margin for critical medical devices and verify your numbers with a meter where possible.

