Updated November 2026
The EcoFlow Delta 2 is a portable power station with a usable capacity of about 1,024Wh, AC output rated at 1,800W, and several charging inputs. This guide walks through what those ecoflow delta 2 specs mean in practice, so you can judge whether the unit fits a backup plan for a fridge, a CPAP or a few lights. We will also show you how to turn the numbers into a rough runtime estimate.
Core Capacity and Output Specs
Battery capacity is the first number to check. Manufacturer specifications list the Delta 2 at roughly 1,024Wh, which is the energy you can draw from a full charge under typical conditions. Real-world output is always lower because of conversion losses in the inverter, so plan on usable energy in the range of 85 to 90 percent of the rated figure.
Shopping for one? See our guide: Ecoflow Delta 3 Classic Review (2026): Specs, Pros and Cons.
The AC outlets are rated at 1,800W continuous, with a surge rating higher than that for short spikes. That output ceiling matters more than most people expect. A microwave or space heater may exceed it, while a refrigerator, router and laptop combined will not. For a deeper look at sizing, see Ef Ecoflow Portable Power Station Delta 2: What It Runs and How Long It Lasts.
Charging Speeds and Input Options
Manufacturers specify several ways to recharge the Delta 2. A standard wall outlet is the slowest option, while a 12V car input and solar input are useful when grid power is down. Charging time depends on which input you use and the input wattage it accepts. Check the rated input figure against the wattage of your charger or panel, because the lower of the two limits the actual charge rate.
If you plan to recharge from solar, the connection hardware matters as much as the panel. Ecoflow Solar Charging Cable: Setup, Specs and Common Mistakes covers the cable details that often cause slow or failed charging.
Estimating Runtime for Your Devices
To estimate runtime, divide usable watt-hours by the average wattage your devices draw, then reduce the result a little for inverter losses. For example, a device drawing 60W continuously would run for roughly 15 hours on a full Delta 2, based on the rated capacity minus losses.
- List each device you want to power and note its running watts from the label or manual.
- Estimate hours of use per day, or the hours you expect to need during an outage.
- Multiply watts by hours to get watt-hours for each device, then add them together.
- Compare the total to about 900Wh, a conservative usable figure for the Delta 2.
| Device | Typical Running Watts | Approx. Runtime on Delta 2 |
|---|---|---|
| LED lights (4 bulbs) | 40W | About 20 hours |
| Wi-Fi router and modem | 20W | About 40 hours |
| Laptop | 60W | About 13 to 15 hours |
| Refrigerator (average duty cycle) | Varies | Check your fridge’s daily kWh rating |
Refrigerators cycle on and off, so their average draw is far below their peak. Look up the daily energy use on the appliance label and compare it against your usable capacity. A CPAP machine is usually light on power, but confirm the wattage on your device before relying on it overnight.
Common Mistakes
- Using the rated 1,024Wh as if all of it were available at the outlet.
- Ignoring surge watts when starting motors such as a sump pump or well pump.
- Assuming solar input speed matches the panel’s label without checking the cable and controller.
- Forgetting that a fridge runs intermittently, so its real daily energy use is what counts.
- Letting the battery sit at very low or full charge for long periods during storage.
FAQ
What is the usable capacity of the EcoFlow Delta 2?
The rated battery capacity is about 1,024Wh, but usable energy at the outlet is lower due to inverter losses. Plan for roughly 85 to 90 percent of that figure when estimating runtime.
Can the Delta 2 run a refrigerator?
Often yes, for a limited time. Use the fridge’s daily kWh rating rather than its peak wattage to estimate how long the battery will last. A licensed electrician can help if you plan a permanent backup connection.
How fast can the Delta 2 recharge?
Charge speed depends on the input you use and its maximum rated wattage. The lowest-rated part of your setup, whether charger, cable or panel, sets the actual rate.
Conclusion
The key ecoflow delta 2 specs are roughly 1,024Wh of capacity, 1,800W of AC output and several input options for recharging. Match those numbers to your devices and you can estimate a realistic outage runtime. For planning, check manufacturer documentation for the exact figures before you buy.
Related reading
- Ecoflow Delta Pro Ultra Solar Input Specs: A Practical Guide (2026)
- EcoFlow Delta 3 Ultra Plus: Specs, Sizing and Home Backup Guide
- Solar Panels for EcoFlow Delta Pro: How to Choose and Connect Them (2026)
- Ef Ecoflow Delta 3: Sizing a Backup Setup for Fridge, CPAP and Sump Pump
- Ecoflow Delta Pro X Explained: Sizing It for Home Backup (2026)

