Updated November 2026
An ecoflow battery power station can keep essential appliances running through a power outage, but only if its capacity matches what you plan to run. This guide shows you how to add up your loads, estimate runtime and choose a unit with enough margin for a real outage. You will finish with a rough watt-hour target you can act on.
Step 1: List the Devices You Need to Run
Start with the loads that matter most during an outage: a refrigerator, a CPAP machine, a sump pump, a router and a few lights. Skip anything you can live without, such as an electric range or a water heater, because those draw far more power than a portable unit can supply for long.
Shopping for one? See our guide: EcoFlow Delta 2 Max Portable Power Station Review: Features and Performance.
Check the nameplate on each device. It lists watts or amps (amps multiplied by volts gives watts). If only a running figure is shown, note the startup surge too, since motors like a sump pump or refrigerator compressor can briefly demand several times their running wattage.
Step 2: Calculate Daily Watt-Hours
Watt-hours (Wh) equal watts multiplied by hours of use. A device rated at 60 W that runs 8 hours a day uses 480 Wh. Refrigerators cycle on and off, so an average duty cycle of about one-third is a reasonable starting assumption if you have no meter reading.
- Refrigerator (about 150 W running, roughly 8 hours of actual compressor time per day): about 1,200 Wh per day
- CPAP (about 40 W, 8 hours overnight): about 320 Wh per night
- Sump pump (about 800 W, 15 minutes per hour during heavy rain, estimated): highly variable, so plan for a buffer
- Router and modem (about 20 W, 24 hours): about 480 Wh per day
Add these together for a daily total, then multiply by the number of outage days you want to cover.
Step 3: Account for Losses and Usable Capacity
Not all stored energy reaches your device. Inverters, conversion steps and battery management all consume some power, so the usable output is always lower than the rated capacity printed on the unit. Manufacturers typically specify rated capacity and output ratings separately, so read both. Multiply your daily need by about 1.2 to 1.3 to cover these losses.
Also keep the battery’s usable depth in mind. Many owners prefer not to drain a lithium battery completely every time, since shallow cycling tends to extend battery life. Plan around a comfortable reserve rather than planning to run it to zero.
Step 4: Match Output Ratings and Pick a Unit
Capacity tells you how long a unit can run. Output rating tells you whether it can start your devices at all. A sump pump with a high startup surge may need a unit whose surge rating exceeds that peak, even if its total watt-hours are sufficient. Compare the continuous and surge output specs before you buy.
| Load | Approximate daily Wh | What to check |
|---|---|---|
| CPAP only | 320 Wh | Continuous output is easily met by most units |
| Fridge + CPAP + router | About 2,000 Wh | Enough capacity for one day plus losses |
| Add sump pump | Varies widely | Confirm surge rating and buffer capacity |
For a broader comparison of models and their stated capacities, see Top 5 EcoFlow Power Stations with Solar Panel Options for Home Backup (2026). If you are weighing battery chemistry, LiFePO4 vs Lithium-Ion (NMC): Which Battery Is Better in a Power Station? explains the tradeoffs in cycle life and weight.
Common Mistakes to Avoid
- Using only the rated watts and forgetting the refrigerator’s duty cycle, which inflates or distorts the estimate.
- Ignoring startup surge on motors, leading to a unit that cannot start the pump at all.
- Planning for zero percent battery, which can shorten the life of the battery over time.
- Forgetting to recharge between outages, especially during extended storms.
- Assuming a stated capacity equals usable energy at the outlet.
Review the safety basics in Lithium Battery Safety for Portable Power Stations before placing a unit indoors or in a garage.
Recommended Gear
- EcoFlow River 2 Pro: a compact option for lighter loads such as a CPAP and router. View on Amazon
- EcoFlow Delta 2: a mid-size unit suited to a refrigerator plus smaller devices over one or more days. View on Amazon
- Kill-A-Watt style plug-in power meter: measures real wattage and daily watt-hours from an appliance, which beats guessing from nameplates. View on Amazon
FAQ
How many watt-hours do I need to run a refrigerator overnight?
A typical refrigerator often uses roughly 1,000 to 1,500 Wh per day, but the exact figure depends on its efficiency, room temperature and how often you open the door. A plug-in power meter over a full day gives the most accurate number.
Can an ecoflow battery power station run a sump pump?
Often yes, but check the pump’s startup surge against the unit’s surge rating first. Also estimate how many pump cycles you expect during a storm, since heavy rain can run a pump far longer than normal.
Is a medical device like a CPAP safe to run on backup power?
Many people use portable power for CPAP machines, but confirm the device’s wattage and any power requirements with your equipment supplier or clinician. Discuss your backup plan with your doctor or sleep provider, especially for life-supporting equipment.
Conclusion
Sizing an ecoflow battery power station comes down to listing your loads, converting them to daily watt-hours and adding a margin for losses. Check surge ratings for motors, and plan around a reserve rather than a full drain. With those numbers in hand, choosing the right unit becomes a straightforward comparison.

