Updated November 2026

The dominion energy power outage map shows where service is interrupted, how many customers are affected, and, in many cases, an estimated restoration time. This guide explains how to find and read the map, what its estimates mean, and how to use that information to decide whether your home needs backup power and for how long.

How to Find the Dominion Energy Power Outage Map

Dominion Energy publishes outage information on its official website and through its mobile app. Go directly to the company’s site or app rather than relying on third-party aggregators, since official sources are updated as crews confirm conditions. Check the official site for current service areas and any reporting options that apply to your location.

Shopping for one? See our guide: 3 Best Power Backup Inverters for Home Picks for Outages (2026). For another angle, check out Solar Electricity Basics: Voltage, Current, Power and Energy.

Once you open the map, zoom to your street or neighborhood. Outage areas are typically shaded or marked, and selecting an area often shows the number of affected customers and the cause, if known.

How to Read the Outage Details

Most maps display three key pieces of information. Learn to interpret each one before you plan around it.

  • Affected customers: The count tells you how widespread the outage is. A small number often points to a localized fault, such as a downed line on your block.
  • Cause: Entries may list weather, equipment failure, vegetation, or “under investigation.” Weather-related outages can take longer when damage is extensive.
  • Estimated restoration time: This is the utility’s best projection, not a guarantee. Estimates often change as crews assess damage, so recheck the map periodically rather than treating the first number as final.

Using the Map to Plan Your Backup Power

The map is most useful when you combine it with your own power needs. Estimate how long your home could run on backup, then compare that to the restoration estimate plus a safety margin.

  1. Note the estimated restoration time and add several hours, since estimates often slip.
  2. List the critical loads you need to keep running, such as a refrigerator, medical equipment, a sump pump, or a few lights and phone chargers.
  3. Add up the watt-hours each device uses over the period you need covered.
  4. Compare that total to your backup system’s usable capacity, leaving reserve for unexpected outage length.

If the restoration estimate is short and your loads are modest, a small battery may be enough. Longer or uncertain outages call for more capacity or a plan to recharge. For a deeper walkthrough of this math, see Using a Solar Generator During a Power Outage: A Practical Plan and Home Backup Power Options: How to Choose the Right One for Outages (2026).

Preparing Before the Next Outage

Bookmark the outage map on your phone so you can check it quickly. Keep a list of the devices you would run on backup and their approximate wattage, so you are not calculating under stress. Confirm your contact information with the utility so you receive updates if your account allows it.

If you rely on powered medical equipment, contact your utility and your medical provider in advance about priority or medical-needs enrollment and a backup plan. Consult a medical professional for guidance specific to your equipment.

Tips and Common Mistakes

  • Don’t assume the first restoration estimate is final. Recheck the map over time.
  • Don’t wait until an outage starts to figure out your power needs.
  • Don’t check only your own block. Nearby outage areas can indicate a larger problem that may take longer.
  • Don’t run space heaters or generators indoors. Keep fuel-burning equipment outside and away from windows.
  • Don’t forget to recheck the map after power returns, in case of a flicker or a secondary outage.
  • Portable power station: A battery unit can keep phones, lights, and small appliances running during a short outage. View on Amazon
  • Battery-powered lantern: Reliable lighting that doesn’t rely on the grid helps when the map shows a long wait. View on Amazon
  • Surge protector with indicator: Protects electronics when power returns, when voltage spikes are common. View on Amazon

FAQ

Is the Dominion Energy power outage map updated in real time?

The map is updated as the utility receives reports and crews confirm conditions. Updates can lag behind what is happening on the ground, so check it periodically during an outage.

Why does my restoration estimate keep changing?

Crews often revise estimates after they assess damage and find out what repairs are needed. Changes are normal, especially during storms.

What should I do if the map shows no outage but my power is out?

Report the outage directly to Dominion Energy through its official website or app, and check your breakers and neighbors’ service. Your individual problem may not yet appear on the map.

Conclusion

The dominion energy power outage map gives you outage locations, causes, and restoration estimates you can use to plan. Pair those estimates with a realistic count of your critical loads to decide how much backup power you need. Check the map regularly, since estimates change as conditions do.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our solar generators for home backup & emergencies guides, checking product details against manufacturer specifications and owner feedback.