Updated November 2026

When breaking news reports a power outage today, the first thing you need is a clear plan: confirm the scope of the outage, protect your electronics, and decide which loads you can keep running. This guide walks through those steps and shows you how to estimate the watt-hours you need for essentials like a refrigerator, a CPAP machine and a sump pump.

Confirm the Outage and Its Likely Duration

Start by checking whether the outage is limited to your home or spread across your area. Your utility’s outage map or app will usually show the affected zone and an estimated restoration time, though those estimates often change. If your neighbors have power, the problem may be a tripped breaker or a failed fuse rather than a utility issue.

Shopping for one? See our guide: 3 Best Power Backup Inverters for Home Picks for Outages (2026).

Plan around a range rather than the first estimate. Short outages of an hour or two rarely need action beyond keeping doors closed, while storms or equipment damage can stretch into days.

Protect Appliances and Sensitive Electronics

Unplug computers, TVs and other electronics that could be damaged by a surge when power returns. Leave one lamp switched on so you know when electricity is restored. If you have a generator or power station, connect it only through a properly installed transfer switch or by plugging individual cords directly into the unit. Never backfeed your home’s wiring through a standard wall outlet, because it endangers utility workers and anyone in your home.

Calculate Your Watt-Hour Needs for Key Loads

Most backup power stations are rated in watt-hours (Wh), so you need to convert each appliance’s power draw into energy used over time. The basic formula is watts × hours = watt-hours. Check the nameplate or manual for wattage; for motors and compressors, the running wattage is usually lower than the starting surge.

  • Refrigerator: Often around 100 to 200 watts running, but it cycles on and off. Owners often estimate roughly 1,000 to 1,500 Wh per day for a standard model, depending on age and efficiency.
  • CPAP machine: Typically 30 to 90 watts while running. Eight hours of sleep at 60 watts uses about 480 Wh, plus a humidifier if you use one.
  • Sump pump: Usually 800 to 1,000 watts when running, but only for short bursts. Estimate the total runtime per hour during heavy rain to size the battery.

Add a 20 to 25 percent buffer to your total because batteries lose some energy in conversion and real-world loads vary.

Load Typical Running Watts Example Daily Energy
Refrigerator 100 to 200 (cycling) About 1,000 to 1,500 Wh
CPAP machine 30 to 90 About 240 to 720 Wh for 8 hours
Sump pump 800 to 1,000 (intermittent) Depends on runtime per hour

Use the Right Power Source for Your Situation

A portable power station works well for CPAP and lighting, while a refrigerator and sump pump need a larger battery bank. Solar charging can extend runtime during multi-day outages, but only if the panels get enough sun. Read the manufacturer’s specifications for surge and continuous output ratings, and confirm the unit can handle the starting current of motor-driven loads. For a deeper dive on sizing, see Home Backup Power Options: How to Choose the Right One for Outages (2026) and Using a Solar Generator During a Power Outage: A Practical Plan.

Checklist for Today’s Outage

  1. Check the utility outage map and note the estimated restoration time.
  2. Unplug sensitive electronics and leave one light on.
  3. Keep the refrigerator and freezer doors closed.
  4. Charge phones, power banks and your backup battery now.
  5. Calculate the watt-hours needed for your CPAP, fridge and sump pump.
  6. Fill containers with water if your well pump or water supply depends on electricity.

Common Mistakes

  • Running a generator indoors or in a garage, where carbon monoxide can build up quickly.
  • Ignoring starting surge, which can shut down an undersized power station.
  • Forgetting that a sump pump needs power during the same storms that cause outages.
  • Waiting until the outage starts to charge your batteries.

A portable power station gives you a flexible way to run essentials without fuel. Look for a unit with enough watt-hour capacity for your CPAP and lighting. View on Amazon

A heavy-duty surge protector helps shield electronics when power returns. View on Amazon

A clamp-on digital multimeter lets you measure actual current draw on appliances before you size a battery. View on Amazon

FAQ

How long can a power station run a refrigerator?

Runtime depends on the fridge’s efficiency, ambient temperature and the battery’s capacity. Divide the battery’s usable watt-hours by the fridge’s average daily energy use to estimate how many days it can run.

Can I run a CPAP machine overnight on battery?

Yes, many CPAP machines draw modest power, so a mid-size power station can cover a full night. Confirm the power requirements with your device maker and your sleep provider.

Should I consult a professional about backup power?

Yes, especially if you plan a whole-home transfer switch or medical equipment setup. A licensed electrician or your medical provider can confirm safe installation and power needs.

Conclusion

When breaking news reports a power outage today, act quickly: confirm the outage scope, protect electronics and calculate the watt-hours for your essential loads. A little planning now means your CPAP, refrigerator and sump pump keep working through the outage. Review your backup setup before the next storm arrives.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our solar generators for home backup & emergencies guides, checking product details against manufacturer specifications and owner feedback.