Updated November 2026
The ecoflow delta pro double voltage hub lets you split the Delta Pro’s high-output power into 120V and 240V circuits so you can run larger appliances during a power outage. This guide explains what the hub does, how to connect it, and how to keep the setup within safe limits. Read the manufacturer manual before any installation, and have a licensed electrician handle wiring to your home.
What the Double Voltage Hub Actually Does
A standard Delta Pro outputs 120V AC from its built-in outlets. Some household loads, such as electric dryers, well pumps, and certain window air conditioners, are designed for 240V. The double voltage hub combines two 120V legs into a 240V output so those loads can run from the station. The hub does not add capacity. It only changes how the existing output is delivered, so your total wattage limit stays the same.
Shopping for one? See our guide: 7 Best EcoFlow Delta Pro Ultra Battery Options Compared (2026).
Check Your Loads Before You Connect Anything
Start by listing what you plan to run and confirming each device’s voltage requirement. A 240V appliance will not work on 120V alone, and a 120V appliance may be damaged if it is plugged into the wrong leg. Next, add up running watts and starting (surge) watts. Motors, compressors, and pumps often draw two to three times their running wattage at startup. Your peak total must stay below the Delta Pro’s rated output, with some margin.
Step-by-Step Setup
- Power off the Delta Pro and all connected loads.
- Confirm the hub is compatible with your specific Delta Pro model and firmware version.
- Connect the hub to the station’s output ports as described in the manufacturer’s manual.
- Plug in only one large load first, such as a fridge or well pump, and watch the app for input and output readings.
- Add the next load only after the first one has run steadily for several minutes.
- Confirm the station is not running hot and that the cables stay cool to the touch.
Sizing Your Backup for 120V and 240V Loads
Map each load to the leg it needs. Keep 120V devices balanced across both legs when possible, because an uneven load can trigger protection shutdowns. The table below shows typical household examples; actual figures vary by model, so check the appliance label.
| Appliance | Typical Voltage | Why It Matters |
|---|---|---|
| Refrigerator | 120V | Compressor surge; balance it on one leg |
| Well pump | 240V (often) | High startup draw; needs the hub |
| Window AC unit | 120V or 240V | Heavy continuous load; check the label |
| Sump pump | 120V | Short bursts; keep it on the balanced leg |
If you are planning a full-home setup, compare your load totals with the sizing guidance in Ecoflow Delta Pro Ultra Portable Power Station: Sizing for Home Outages (2026) before you commit to one configuration.
Common Mistakes to Avoid
- Plugging a 240V appliance into the 120V outlets and expecting it to run.
- Ignoring surge watts and overloading the station at motor startup.
- Running the hub on a hot day without airflow around the unit.
- Using undersized or damaged extension cords.
- Skipping a firmware check, which can affect hub compatibility.
For more on handling the station itself, see Ecoflow Delta Pro Remote Control: How to Use the App and Controls (2026).
Recommended Gear
A heavy-gauge outdoor extension cord rated for the expected current helps keep voltage drop and heat under control. View on Amazon
A plug-in power monitor lets you check the draw of individual appliances before connecting them to the hub. View on Amazon
FAQ
Does the double voltage hub increase my Delta Pro’s capacity?
No. The hub changes how the existing output is delivered as 240V, but total wattage and battery capacity stay the same.
Can I run an electric dryer from the hub during an outage?
Most electric dryers draw too much power for a portable station, even with the hub. Check the dryer’s rated watts and surge demand against your model’s output limit before attempting it.
Should I have an electrician install the hub?
If the connection involves your home’s panel or a transfer switch, yes. A licensed electrician can confirm the wiring meets local code and protects both your equipment and your home.
Conclusion
The ecoflow delta pro double voltage hub gives you access to 240V loads without increasing the station’s total output. Map each appliance’s voltage and surge demand before connecting, and start with one load at a time. With careful planning, the hub can keep essential 240V equipment running through an outage.

