Updated November 2026
The ecoflow delta 3 classic power station is a portable battery unit that can keep a refrigerator, CPAP machine, sump pump, phone chargers, and a few lights running during a power cut. This guide shows you how to total the wattage of those devices, convert it into watt-hours, and estimate how many hours the unit will last before you need to recharge it.
Step 1: List What You Need to Power
Start with the devices you truly need during an outage, not everything in the house. Check each label or the manufacturer’s spec sheet for two numbers: running watts (the steady draw) and starting watts (the brief surge when a motor kicks on). Compressors, pumps, and CPAP machines all have surge loads, so note both.
Shopping for one? See our guide: EcoFlow Delta 2 Max Portable Power Station Review: Features and Performance.
Common examples include a mini or full-size refrigerator, a CPAP at roughly 30 to 60 watts depending on the model and humidifier use, a sump pump at several hundred watts while running, and LED lighting at under 10 watts per bulb.
Step 2: Convert Loads into Watt-Hours
Watt-hours (Wh) are what a battery stores. To estimate daily energy use, multiply each device’s running watts by the hours it runs per day, then add the results together. A refrigerator that averages 100 watts and runs about 8 hours a day uses roughly 800 Wh per day, though many fridges cycle on and off and draw less on average.
Next, account for inverter and conversion losses. Plan on losing around 10 to 20 percent of the battery’s energy during conversion from DC to AC, so divide your stored capacity by about 0.85 for a realistic runtime estimate.
Step 3: Estimate Runtime
Divide the usable watt-hours of the power station by your total daily load in watt-hours. If your essentials add up to 600 Wh per day and the unit provides roughly 800 usable Wh after losses, you can expect about 1.3 days of runtime without recharging. Sump pumps and space heaters shorten this quickly, so run them only when needed.
| Device | Typical Running Watts | Hours Per Day | Approx. Daily Wh |
|---|---|---|---|
| Mini refrigerator | 50 to 80 | 8 | 400 to 640 |
| CPAP machine | 30 to 60 | 8 | 240 to 480 |
| LED lights (4 bulbs) | 40 | 4 | 160 |
| Phone and laptop charging | 60 | 2 | 120 |
These ranges are general and vary by model. Check your own appliance labels before relying on them.
Step 4: Plan Recharging
Outages can last longer than a single charge. Plan how you will restore power to the unit, whether from a wall outlet once utility power returns, a car charger, or solar panels. Recharge times depend on the input rate, so review the manufacturer’s stated input specifications and plan around them.
Common Mistakes to Avoid
- Ignoring surge watts. A sump pump can draw several times its running wattage when it starts.
- Forgetting conversion losses, which leads to overestimating runtime.
- Running space heaters or electric dryers, which drain the battery far faster than essentials.
- Waiting until a storm to charge the unit. Keep it topped up before severe weather.
- Assuming a fridge runs all day at its peak wattage. Check its average consumption instead.
Recommended Gear
- A plug-in watt meter helps you measure actual draw from a fridge or CPAP so your numbers are based on real use. View on Amazon
- Heavy-duty extension cords rated for your appliance load keep connections safe when running devices from the station. View on Amazon
FAQ
Can the ecoflow delta 3 classic power station run a refrigerator overnight?
Often yes, since many modern refrigerators average well under their peak draw. Measure your fridge’s actual consumption with a watt meter to confirm how many hours it will last.
Is it safe to run a CPAP machine from a portable power station?
Many users do this, but confirm the power station’s output and surge limits against your CPAP’s label first. Consult your sleep physician or equipment provider before relying on it for medical therapy.
How do I know if the power station can handle a sump pump?
Compare the pump’s starting watts with the unit’s rated output and surge capability. If the surge exceeds the rating, the pump may not start reliably.
Conclusion
To size the ecoflow delta 3 classic power station for an outage, list your essential devices, convert their loads into daily watt-hours, and apply a conversion loss allowance. Verify surge requirements for motor-driven loads, and keep the unit charged ahead of storms. For guidance on larger loads or medical equipment, speak with a licensed electrician or your equipment provider.

