Updated November 2026
Setting up your home power backup means matching a battery or portable power station to the devices you truly need during an outage. In practice, that comes down to listing critical loads, calculating how much energy they use, choosing a backup source that covers that total, and connecting it safely. This guide walks through each step so you end up with a system that keeps the fridge cold, the CPAP running, and the sump pump moving.
Step 1: List Your Critical Loads
Start by deciding what must keep running. Most households focus on a short list: refrigerator or freezer, a CPAP machine, a sump pump, a few lights, a router, and phone charging. Skip large resistive loads like electric dryers, electric water heaters, and central air conditioning unless you plan a whole-home system, since they drain a battery quickly.
Shopping for one? See our guide: Top 5 EcoFlow Power Stations with Solar Panel Options for Home Backup (2026).
Step 2: Calculate Your Watt-Hours
For each device, multiply its running wattage by the hours you expect to use it per day. A refrigerator might draw roughly 150 watts while running and cycle on and off, so its real daily use is often well under its nameplate maximum. Check the label or the manufacturer’s specifications, then add the daily totals. Add a 20 percent margin to cover inverter losses and battery aging.
Quick Reference Example
| Device | Approx. Running Watts | Hours Per Day | Watt-Hours Per Day |
|---|---|---|---|
| Refrigerator | 150 | 8 (average duty cycle) | 1,200 |
| CPAP machine | 60 | 8 | 480 |
| Sump pump (1/3 HP) | 800 | 0.5 | 400 |
| LED lights (4 fixtures) | 40 | 5 | 200 |
| Router and modem | 20 | 24 | 480 |
In this example the total is about 2,760 watt-hours per day, or roughly 3,300 with a 20 percent margin. Your numbers will differ, so use your own appliance labels.
Step 3: Choose a Backup Source and Size It
Pick a power station or battery system whose usable capacity exceeds your daily total, and confirm its inverter can handle the highest surge load, such as a sump pump motor starting. A portable power station works well for a few essentials, while a larger system suits longer outages. Owners often report that pairing a station with solar panels extends runtime for multi-day outages, but solar only helps if you have sun exposure. If you are weighing options, this overview of Home Backup Power Options is a useful starting point; see Home Backup Power Options: How to Choose the Right One for Outages (2026).
Step 4: Connect Safely
- Plug critical devices directly into the power station’s outlets, not into a wall outlet.
- Never backfeed your home’s electrical panel through a standard generator inlet or extension cord. Backfeeding can injure utility workers and damage equipment.
- If you want whole-house wiring, use a transfer switch installed by a licensed electrician.
- Keep the unit outdoors or in a well-ventilated space, away from rain and flammable materials.
- Test the setup once a month by running it for a few minutes under load.
For a deeper look at connection methods, see Home Backup With a Solar Generator: What It Can Power and How to Connect Safely.
Common Mistakes
- Sizing only for average use and ignoring surge demand from motors.
- Forgetting to charge the battery before storm season.
- Running a space heater or electric dryer on a unit sized for essentials.
- Skipping the 20 percent margin, which leaves you short by the second day.
- Storing the unit in a hot garage, which shortens battery life.
Recommended Gear
- EcoFlow DELTA Pro: A large portable power station suited to multiple critical loads and extended outages. View on Amazon
- Jackery Explorer 1000: A mid-size station that fits a fridge, CPAP, and lighting for a night or two. View on Amazon
- Kill A Watt Electricity Usage Monitor: Plugs between an appliance and the wall to measure real watt-hour use, helping you refine your calculation. View on Amazon
FAQ
How many watt-hours do I need for a refrigerator during an outage?
A typical refrigerator often uses around 1,000 to 1,500 watt-hours per day, depending on its age, size, and how often the door opens. Measuring with a plug-in monitor gives the most accurate figure for your appliance.
Can I run my whole house on a portable power station?
Usually not for long, because central air, electric water heaters, and dryers draw too much power. Most households plan around essential circuits instead of the whole house.
Do I need an electrician to set up home backup?
Plug-in portable units require no installation. Connecting a system to your home’s wiring should be done by a licensed electrician to meet code and avoid backfeed hazards.
Conclusion
Set up your home power backup by listing essential loads, calculating daily watt-hours with a margin, and choosing a source that covers that total. Connect devices safely, test the system regularly, and keep it charged before outages hit. A little planning now means your refrigerator, medical equipment, and sump pump keep working when the grid does not.

