Updated November 2026

A portable solar power generator system is a battery power station paired with one or more solar panels, and it can keep essential home loads running during an outage. This guide shows you how to total the watt-hours your critical devices need, size the battery, and check whether solar panels can recharge it. By the end, you will have a rough target capacity you can compare against real products.

Step 1: List the Loads You Actually Need

Start with the devices you cannot go without for the length of a typical outage. Most households focus on a refrigerator, a CPAP machine, a sump pump, a router and a few lights. Skip anything you can live without, such as a microwave or space heater, since these draw far more power than a backup system can sustain.

Shopping for one? See our guide: 6 Best Jackery Explorer 290 Portable Power Solar Generators (2026): Our Picks.

Step 2: Calculate Watt-Hours for Each Device

Watt-hours (Wh) equal the device’s wattage multiplied by how many hours it runs per day. Check the label or manual for wattage. For cycling appliances like refrigerators, the compressor runs only part of the time, so estimate roughly one-third of the nameplate running time.

Device Typical draw Daily estimate
Mini refrigerator About 50 to 100 W while running About 300 to 600 Wh/day
CPAP machine About 30 to 60 W About 200 to 400 Wh per 8-hour night
Sump pump (1/3 hp) About 500 to 800 W while running Depends on how often it cycles; often 100 to 300 Wh
Wi-Fi router and modem About 10 to 20 W About 240 to 480 Wh/day

These figures are rough. Manufacturers specify exact ratings, so use your own appliance labels whenever possible.

Step 3: Size the Battery With a Safety Margin

Add your daily watt-hour totals, then multiply by the number of days you want to cover. Battery stations lose some energy to inverter conversion, so add about 15 to 20 percent on top. For example, 1,000 Wh of daily loads over two days, plus margin, points to a battery of roughly 2,400 Wh or more.

Also check surge ratings. A sump pump may need several times its running wattage at startup, and the station’s inverter must handle that spike. For a deeper look, see Surge vs Continuous Power: What Your Solar Generator Can Actually Start.

Step 4: Plan the Solar Recharge

Solar panels refill the battery during daylight. Divide your daily watt-hour need by the number of usable sun hours in your area, which is typically 3 to 5 in much of the US, to estimate panel wattage. Cloudy days reduce output, so many people plan for a larger array than the math alone suggests. You can run through the numbers with Solar Panel Size Calculator for Portable Power Stations. For a general overview of how the parts fit together, read What Is a Portable Solar Generator System and How Does It Work?

Checklist Before You Buy

  1. Total watt-hours for every critical device per day.
  2. Add a 15 to 20 percent inverter and efficiency margin.
  3. Multiply by the number of outage days you want to cover.
  4. Confirm the inverter handles surge wattage for motor loads.
  5. Estimate panel wattage from local sun hours and your daily need.

Common Mistakes

  • Sizing only for the battery capacity and ignoring surge demand from pumps.
  • Assuming the label wattage runs continuously when compressors cycle.
  • Forgetting that a CPAP needs power all night, not just briefly.
  • Skipping a plan for recharging after the first day.
  • Running heavy appliances like space heaters that drain the battery quickly.
  • Portable power station: The battery and inverter core of the system, sized from your watt-hour total. View on Amazon
  • Foldable solar panels: Easy to position toward the sun and store when not in use. View on Amazon
  • Plug-in watt meter: Measures actual draw from appliances so your estimates rest on real numbers. View on Amazon

FAQ

How many watt-hours do I need for a refrigerator during an outage?

A typical mini refrigerator often uses roughly 300 to 600 Wh per day, depending on size and how often the compressor cycles. A full-size fridge uses more. Check the appliance’s energy label or a plug-in meter for a better figure.

Can a portable solar power generator system run a CPAP overnight?

Yes, in most cases. A CPAP typically draws 30 to 60 W, so a full night often takes a few hundred watt-hours. Consult your sleep specialist or equipment supplier before relying on any backup system for medical equipment.

Does a sump pump work with a solar generator?

It can, but the inverter must handle the pump’s startup surge. Confirm the surge rating and the pump’s running wattage, and consider a licensed electrician if you plan a permanent connection.

Conclusion

A portable solar power generator system works best when you size it from your actual loads rather than from marketing numbers. Total the watt-hours for each critical device, add a safety margin, and plan solar recharging for cloudy days. Once you have a target capacity, compare products that meet both battery and surge requirements.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our solar generators for home backup & emergencies guides, checking product details against manufacturer specifications and owner feedback.