6 Best EcoFlow Automatic Transfer Switch Options for Home Backup (2026)

By Emily Parker

Updated November 2026

Shoppers looking for an ecoflow automatic transfer switch usually want one thing: a way to bring backup power into the house during an outage without flipping breakers by hand. This list covers six automatic transfer switches that owners and installers commonly pair with portable power stations or standby generators. Each pick was judged on amperage rating, compatibility with solar and generator inputs, voltage support, enclosure type and the clarity of owner feedback about installation and reliability.

Our Top Picks

Before comparing, understand what you are buying. An automatic transfer switch (ATS) senses loss of utility power and moves your circuits to a backup source, then reverses when grid power returns. Transfer switches are rated by amperage, and that rating must match or exceed the service feeding the circuits you connect. Many ATS listings are sold as generator-ready, and some EcoFlow and Jackery owners use them with a station’s dedicated input or a generator. Confirm compatibility with your specific model before buying.

Quick Comparison

Jackery Smart Transfer Switch

Jackery Smart Transfer Switch,Max. 60 kWh/14400 W | Home Backup with Solar Generator 5000 Plus, Automatic 20ms UPS for Emergencies, Power Outages, Off-Grid, EV Charging

View on Amazon

Best for: Solar-based home backup with a pairing to a Jackery power station

This is the switch for owners who want a managed backup system with solar input, grid detection and quick switchover. It suits households that want the system to take over without a manual step.

Key specs

• Listed capacity up to 14,400 W and 60 kWh per the product name
• Automatic switchover with a stated 20ms transfer time
• Designed for use with Jackery Solar Generator 5000 Plus

Pros

• Automatic transfer reduces the need to act during an outage
• Built to pair with solar generation and EV charging scenarios
• Clear positioning as a complete home backup component

Cons

• Best value comes when used with a matching Jackery system
• Installation still benefits from a licensed electrician

Bottom line: A strong first choice for someone building a complete Jackery-based home backup system with solar.

RXSW200A3 200 Amp Automatic Transfer Switch

RXSW200A3 200 Amp Automatic Transfer Switch w/Power Management Replacement for Generac, Service Entrance Rated, NEMA 3R Aluminum Enclosure

View on Amazon

Best for: Whole-home service entrance backup

Homeowners with larger panels and a standby generator are the intended audience. The 200 amp rating and NEMA 3R aluminum enclosure suit outdoor or garage installs.

Key specs

• 200 amp rating per the product name
• NEMA 3R aluminum enclosure for outdoor exposure
• Listed as a replacement for Generac-style transfer switches

Pros

• Covers whole-home loads on larger service
• Weather-resistant enclosure suits outdoor mounting
• Includes power management features per the listing

Cons

• Requires professional installation at the service panel
• Overkill for small apartments or partial-home backup

Bottom line: Best suited to whole-home backup with a permanently installed generator and a licensed installer.

100Amp AC110V Automatic/Manual Transfer Switch 2P

100Amp AC110V Automatic/Manual Transfer Switch 2P 50/60Hz, 2POLE 100A Mini ATS Solar Auto Dual Power Switch for Home Generator, Din Rail Mounted Cn Automatic Changeover Fast Transfe for Rv, Lv Power

View on Amazon

Best for: RV and mid-size panel backup

Owners of RVs, workshops and mid-size homes who want automatic switching with a manual override will find this a practical fit.

Key specs

• 100 amp, 2-pole design
• 110V operation at 50/60Hz per the listing
• DIN rail mounting

Pros

• Automatic and manual modes in one unit
• DIN rail mounting simplifies panel installation
• Useful for both solar and generator sources

Cons

• Listing detail varies, so confirm specs with the seller
• Electrician involvement is still recommended

Bottom line: A good middle-ground choice for RV or workshop backup with automatic switching.

63A 110V Automatic/Manual Transfer Switch Dual Power 2P ATS

63A 110V Automatic/Manual Transfer Switch Dual Power 2P ATS for Generator | 50/60Hz LED Display CE Certified ATS for Generator/RV/Solar Backup Power & Gas Furnace Supply

View on Amazon

Best for: Small kitchens and sub-panel circuits

This suits people who only need to protect a limited set of circuits, such as a refrigerator, lighting and a freezer.

Key specs

• 63 amp, 2-pole rating
• 110V, 50/60Hz operation
• LED display and CE certification per the listing

Pros

• LED display helps monitor status at a glance
• Smaller footprint than whole-home units
• Works with generator, RV and solar sources

Cons

• Limited capacity for central air or electric range loads
• Certification markings should be checked against local code

Bottom line: Fits households backing up essential circuits rather than the full home.

AC120V 15Amp Automatic Transfer Switch

AC120V 15Amp Automatic Transfer Switch, Generator ATS Auto Transfer Switch (NEMA 5-15P/R)

View on Amazon

Best for: Light loads and small appliance backup

Owners who need to keep a few lamps, a router or a small fridge running with an NEMA 5-15 connection will find this the simplest option here.

Key specs

• 120V, 15 amp rating per the listing
• NEMA 5-15P/R plug-style connection
• Automatic transfer

Pros

• Lowest amperage among the picks, so simpler to scope
• Plug-style connection can be easier for light loads
• Automatic operation without manual switching

Cons

• 15 amps limits how much you can run at once
• Not suited for large appliances or whole-home use

Bottom line: A budget pick for light emergency loads, not a whole-home solution.

Nature’s Generator 30 Amp Manual Transfer Switch 6-Circuit 120V

Nature's Generator 30 Amp Manual Transfer Switch 6-Circuit 120V, UL Listed Non-Automatic Power Transfer Kit, Pre-Wired Indoor for Portable Generator

View on Amazon

Best for: Manual backup with a portable generator

This is for people who prefer a manual changeover and want a pre-wired indoor kit for a portable generator.

Key specs

• 30 amp rating
• 6 circuits, 120V
• UL listed, pre-wired indoor kit

Pros

• Pre-wired kit reduces installation steps
• UL listing supports code-conscious installs
• Manual control suits owners who want full oversight

Cons

• Requires someone to switch it manually during outages
• Not automatic, so it does not suit unattended backup

Bottom line: Right for a manual, generator-based setup where you are available to change the switch.

Buying Guide

Amperage Rating

Match the transfer switch rating to your main breaker or service. A 30 amp unit fits a small subset of circuits, while a 200 amp unit is meant for full service. Check your panel label before buying.

Good picks for this: RXSW200A3 200 Amp Automatic Transfer Switch, Nature’s Generator 30 Amp Manual Transfer Switch

Automatic vs. Manual Operation

Automatic switches detect outages and transfer on their own, which matters if you are away or asleep. Manual switches require a person to flip the unit, which is simpler and often less expensive to install.

Good picks for this: Jackery Smart Transfer Switch, 63A 110V Automatic/Manual Transfer Switch

Voltage and Frequency Support

Confirm the unit supports 120V or 240V service and 50/60Hz as needed. Most US homes use 120/240V split-phase at 60Hz.

Good picks for this: 100Amp AC110V Automatic/Manual Transfer Switch, AC120V 15Amp Automatic Transfer Switch

Enclosure and Location

Indoor garages and utility rooms can use a standard enclosure, while outdoor installs need NEMA 3R or similar weather protection.

Good picks for this: RXSW200A3 200 Amp Automatic Transfer Switch, Nature’s Generator 30 Amp Manual Transfer Switch

Compatibility with Your Backup Source

Check whether the switch is designed for a portable power station, a solar input or a standby generator. Pairing a switch with the wrong source can create backfeed hazards.

Good picks for this: Jackery Smart Transfer Switch, 63A 110V Automatic/Manual Transfer Switch

Use Case and Load Planning

List the circuits you want to keep running and add their wattages. Refrigerators, sump pumps and medical devices should be prioritized. The U.S. Department of Energy offers guidance on sizing backup power for essential loads.

Good picks for this: AC120V 15Amp Automatic Transfer Switch, 63A 110V Automatic/Manual Transfer Switch

Installation and Code Compliance

Transfer switches generally need a licensed electrician and a permit in most jurisdictions. Improper wiring can create backfeed to the utility grid, which is dangerous to line workers.

Good picks for this: RXSW200A3 200 Amp Automatic Transfer Switch, Nature’s Generator 30 Amp Manual Transfer Switch

FAQ

What is an automatic transfer switch used for?

An automatic transfer switch moves selected circuits from the utility grid to a backup power source when an outage occurs, and returns them to the grid when power is restored.

Can I use an EcoFlow power station with a transfer switch?

Many owners connect an EcoFlow station to a transfer switch or inlet, but compatibility depends on the model and the switch. Check the manufacturer’s manual and consult a licensed electrician before wiring.

How do I know what amp rating I need?

Look at your main breaker size and the circuits you plan to back up. The transfer switch rating should match or exceed the load you intend to power.

Is a manual transfer switch safer than an automatic one?

Both can be installed safely when wired correctly. Manual switches require user action, while automatic ones depend on sensing equipment. Neither should be wired without following local code.

Do I need a permit to install a transfer switch?

Many areas require a permit and inspection. Requirements vary by jurisdiction, so check with your local building department.

Can a transfer switch power my whole house?

Only if the switch is rated for your service size and your backup source can supply the full load. Most homes back up essential circuits rather than everything.

Conclusion

For a complete Jackery-based system with automatic switchover, the Jackery Smart Transfer Switch is a logical starting point. Homeowners backing up a whole house with a generator should look at the 200 amp RXSW200A3. RV owners and workshops may prefer the 100 amp unit, while small kitchens and light loads suit the 63A or 15A options. Anyone preferring manual control will find the Nature’s Generator kit practical. Always have a licensed electrician verify the installation.

Sources

• Guidance on backup power planning, load sizing and home energy systems (energy.gov)
• Electrical installation and code standards relevant to transfer equipment (nfpa.org)
• Product safety certification information and listing standards (ul.com)

Related reading

• 8 Best EcoFlow Manual Transfer Switch Options for Home Backup (2026)
• 7 Best EcoFlow Home Backup Kit Transfer Switch Options for 2026
• Jackery Smart Transfer Switch: How to Choose and Set It Up Safely
• Jackery Manual Transfer Switch: Step-by-Step Setup for Home Backup
• Top 5 EcoFlow EV X-Stream Adapter Options for Home Backup

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our solar generators for home backup & emergencies guides, checking product details against manufacturer specifications and owner feedback.