Updated November 2026
A refrigerator uses far less power than most people expect, but it runs around the clock, so the energy adds up fast. For most homes, a portable power station with roughly 1,000 to 2,000 watt-hours of capacity can keep a standard fridge running through a typical overnight or multi-day outage, depending on the unit’s age, temperature settings and how often the door is opened.
Why a Fridge Needs More Backup Than You Think
Refrigerators cycle on and off. The compressor runs for a while, shuts off, then restarts when the inside warms up. Manufacturers often list energy use as kilowatt-hours per year, which works out to an average draw of roughly 100 to 200 watts over a full day. The actual draw while the compressor is running is higher, often several hundred watts, and that surge matters when you pick a power station.
Shopping for one? See our guide: Top 5 EcoFlow Power Stations with Solar Panel Options for Home Backup (2026).
Older units, large side-by-side models and fridges kept in a hot garage tend to run longer cycles. A fridge in a 90-degree kitchen works harder than one in a climate-controlled room, so your numbers will shift.
How to Calculate the Watt-Hours You Need
Start with the nameplate or the yellow EnergyGuide label, which lists annual kWh use. Divide that number by 365 to get daily kWh, then multiply by 1,000 to convert to watt-hours. A fridge rated at 500 kWh per year uses about 1.4 kWh, or 1,400 Wh, per day.
Next, decide how many hours of coverage you want. Plan for at least 1.2 times the daily figure to account for conversion losses and inverter inefficiency. For example, 1,400 Wh per day multiplied by 1.2 comes to roughly 1,700 Wh for one day. If you want two days of coverage, you would need about 3,400 Wh. The full sizing process for a whole house is covered in Whole Home Power Backup System: How to Size One for Outages (2026), which uses the same method.
Practical Steps to Stretch Backup Power
- Set the fridge to a cooler setting before the storm hits so it has thermal mass to lean on.
- Fill empty space with water bottles or frozen gallon jugs. Frozen items hold cold longer than air.
- Keep the door closed. A fully stocked fridge typically keeps food at safe temperatures for about four hours if unopened.
- Check the appliance’s wattage label and confirm the power station’s continuous output rating exceeds the fridge’s running draw.
- Use a thermometer inside the fridge. The USDA advises discarding perishable food that has stayed above 40°F for more than two hours.
- Plan ahead by reading What to Do During Power Outage: A Step-by-Step Plan for Home Backup so you know which other loads to shut off first.
What We’d Use
A portable power station with a pure sine wave inverter and enough capacity for your calculated watt-hours is the most practical choice for a fridge. Owners often report that the EcoFlow DELTA series handles refrigerator loads well when sized correctly: View on Amazon.
If you want a unit that can recharge from solar panels during a long outage, the Jackery Explorer series is widely sold and often paired with solar input: View on Amazon.
FAQ
How long will a power station run a refrigerator?
It depends on capacity and the fridge’s daily use. A 2,000 Wh station may cover a modern fridge for roughly a day or more, but actual runtime varies with ambient temperature and how often the door opens.
Can I plug a refrigerator into a regular extension cord to a power station?
Use a short, heavy-gauge cord rated for the fridge’s amperage, and never run it through a power strip. Check your power station’s manual for approved connections, and consult a licensed electrician before connecting anything to household wiring.
Is a generator better than a battery for a fridge?
Generators provide longer runtime but produce fumes and noise and must be run outdoors. A battery power station is quieter and safe indoors, but its runtime is limited by capacity. For most fridge-only backup, a battery unit is the simpler option.

